AUTOMATED SOLVENT RECOVERY SYSTEMS
AUTOVAP™ 300 Solvent Recovery System
Up to 300 US Gal/Hr* (1135+ liters) per hour recovery
Utilizing the same Allan Bradley control system with larger drives than the smaller systems, the AutoVap 300 is our largest standard offering. Boasting a 1.5 Million BTU heating system and 80 Tons of cooling, the AV300 is the largest domestically built falling film evaporator in the industry. As always, up to 99%+ solvent recovery and over 300 US Gal/hr of solvent recovery! (ratings are based on ethanol, heptane and other solvents can operate faster)
Built to last in the USA, our solvent recovery systems are leading the industry in innovation, integration, and automation. BPE finishes and coriolis upgrades available.
Large-Scale Automated Solvent Recovery
With a recovery rate of up to 300 gallons per
hour, and continuous, automated operation,
the AV300 recovers 95%+ solvent on the first
pass.
Lower your footprint, costs, and time of
operation while eliminating any bottlenecks
with the AutoVap. Find out why all the
leaders in the extraction industry are turning
to TruSteel.
*Different solvents may result in
varied recovery rates.
Up to 300 US Gal/Hr*
(1135 Liters) Per Hour Recovery
Complete Automation
Easy to Read Display
95-99% Solvent Recovery
Precise Parameters/Control
Low Residence Time
Less than 3 Minutes
C1D2 Compliant
Hazloc Motors & Intrinsically Safe HMI
Peer Engineer Reviewed
Streamlined Safety Approval Process
UL 508B Compliant
US & Canada
Made in USA
Highest Standard of Quality & Testing
Quality Standards
| Chiller (80 Ton Cooling Power) | 460V/3Ø/156A 181 x 86 x 85 (LxWxH inches) 6279 lbs. (empty weight) |
| Compressed Vapor Recovery | Powered by PLC |
| Water Heater Skid | 72 x 96 x 48 (LxWxH inches) Water Pump Control Panel 230-240V/3Ø/28A Option 1: Electric 480V/3Ø/362A Option 2: Gas 1.2M BTU 2” GAS CONNECTION |
| Control Panel [PLC] | 208-240V / 3ø / 30A 8 x 36 x 48 (LxWxH inches) |
| AV300 Footprint | 36 x 75 x 126 (LxWxH inches) |
- Up to 300 US Gal/Hr Recovery*
- 95-99% Removal 1st Pass
- <3 Minute Residence Time
- Fully Automated Operation
- Fail Safes, Alarms, Data Logging, Remote Control
- Material: Stainless Steel, PTFE, & Borosilicate
- Compatible with: Ethanol, Methanol, Heptane, Hexane, Acetone, Acetonitrile
- UL Listed Ancillary Equipment Included: Heating System, Cooling System, and Vacuum
- Solvent Resistant Touch Screen
- Engineer Reviewed for Safe Operation in Hazardous Locations
- USA and Canadian UL 508B Listed
- Installation, Training & Support Included
- 1 Year Warranty
*Different solvents may result in varied recovery rates.
| Facility Power | 480V |
| Phase | 3Ø |
| Total Amps (Electric Heater) | 662 |
| Total Amps (Gas Heater) | 306 |
Looking for a custom SOLVENT RECOVERY SOLUTION?
Our engineers can build a custom solution for you.
